Category: Screwdrivers


  • Kwong Yuen Watchmaker Screwdrivers

    Kwong Yuen Watchmaker Screwdrivers Review – Are They Worth It?

    kwongyuen top.v01
    • Reviewed by: Little Watch Workshop
    • Purchase Source: Aliexpress
    • Purchased: October 2026
    • Time tested: 3 Weeks
    • Review Type: Independently purchased

    Product Specification

    • Brand: Kwong Yuen
    • Product: Watchmaker screwdriver set 12 pieces + Base
    • Quantity: 12
    • Handle Material: Unknown (possibly stainless steel) (knurled)
    • Tip Material: Unknown (possibly stainless steel)
    • Tip Sizes: 0.5mm – 3.0mm
    • Packaging: Box
    • Purchase Price: I purchased this set for $101.10 USD, excluding shipping, in October 2026. Prices and availability may change.
    • Notes: Spare tips included

    Affiliate disclosure: This review contains affiliate links. If you purchase through one of these links, Little Watch Workshop may earn a small commission at no additional cost to you. I only recommend tools that I have personally purchased or used, and all opinions expressed are my own. I am not a professional. I am a hobbyist who is learning. Any equipment or tools I discuss are purchased with my own money unless stated otherwise. Using my affiliate links help support my costs for hosting, tools and equipment. Thank you for your support.

    Introduction

    This is the Kwong Yuen watchmaker’s screwdriver set. The set comes with a weighted base and 12 different screwdriver sizes. Each screwdriver is color coded on the top and that corresponds to the colored slot in the weighted base. The base feels solid and allows the user to rotate either clockwise or counter clockwise with a smooth motion.

    These were the very first watch related tool that I purchased. It was also by far one of the more expensive purchases to get started. Based on all my research online, screwdrivers were not a piece of equipment to go cheap on. These are essential to working on watch movements and they will get use everyday. I needed a solid set and this was at the top of my budget. Bergeon and Horotec are two established names in professional watchmaking tools, and their screwdriver sets are generally positioned at a higher price point which was outside my budget. When shopping for screwdrivers I was looking for the best quality I could get at this price point. I also wanted to buy a set and avoid having to buy single pieces since I didn’t know what sizes I would need moving forward during my learning process. I purchased these on AliExpress with my own money.

    Packaging and First Impressions

    kwongyuen box v2

    They arrived in a standard brown shipping box from AliExpress. Inside that outer box, they were in another smaller branded box that was yellow. The packaging seemed pretty good and the tools arrived without any damage. The order was placed on Oct 27, 2026 and arrived on Nov 8, 2026.

    kwongyuen.baseholder

    The screwdriver holder or weighted base is about 27mm tall on the outer edge and the center red cap that covers the storage area is about 40mm tall. This base seems to sit quite a bit lower than equivalent in the Bergeon brand. The center red cap does not screw down. It simply lifts up to expose a small storage area where the supplied extra tips can be stored. While the outer base is well manufactured and looks great, you can see the storage slots are more rough. This is clearly an area where manufacturing was sped up and less refined to save time and costs. Which isn’t a huge issue if you keep it covered with the supplied red cap.

    kwongyuen.baseholder.storage

    Build Quality and Design

    kwongyuen.05mm

    The handle top pivot/bearings are smooth and spin freely making removing tiny screws a pleasurable experience. Out of all 12 handles my set didn’t have any issues with friction and appeared well machined. The handle shaft is knurled in both directions making it easy to grip and work with even for someone who’s new to using watchmakers screwdrivers.

    kwongyuen.compare

    Blade/Tip Quality and Preparation

    kwongyuen.3mm.blade

    The tips arrived in good condition. No marks or rust was present. They were lightly polished. I checked the profile against a straight edge and they are indeed a straight taper and not hollow ground. All of the tips arrived sharp enough to scratch my fingernail, but they will require dressing and sharpening on a stone before use on a movement. The blades are removable and easily swapped out. There is a small grub screw that helps hold each blade in place. Spare blades are included.

    kwongyuen.3mm.screw
    kwongyuen.generic

    Real-World Performance

    Since I do not have a Horotec or Bergeon set of screwdrivers to compare to I can’t make any comments regarding the leading brands. I do have a photo here where I compared it to my cheap hardware store screwdriver and you can clearly see the differences in quality.

    After a week of moderate use these are working really well. I have used these to disassemble one ST3600 movement and reassemble it multiple times without any issues from the screwdrivers. Yes, the supplied blade sizes fit all the screws inside the movement. During my initial testing they didn’t feel sharp enough. I dressed them on an oil stone to the best of my ability and this improved the performance dramatically. For someone starting out this is a good investment before stepping up into a more expensive set. Once I have a Bergeon screwdriver I’ll update this post with a revised comparison. So far Kwong Yuen has earned a place on my bench.

    Pros and Cons

    Pros

    • Smooth rotating handles.
    • Comfortable knurled grips.
    • Weighted, rotating storage base.
    • Twelve screwdriver sizes.
    • Spare tips included.
    • Good initial construction quality

    Con

    • Blade geometry isn’t as refined as a properly hollow-ground blade.
    • Some rough finishing inside the storage base.
    • Limited evidence of long-term durability.
    • No direct comparison with Bergeon or Horotec.
    • Unknown blade/tip steel.

    Who Should Buy These?

    If you’re a beginner in the hobby of watch repair and watchmaking or you’re looking to upgrade an older pair of generic cheap screwdrivers. I believe the Kwong Yuen are acceptable for the Hobbyist and suitable for small workshop use. I’m not a professional so it’s hard to recommend these to professionals. If you’re a professional, you’ve probably already got a set from a major brand these might not be appropriate.

    Final Verdict

    I think these are the best buy at this price point before upgrading to one of the more popular brands like Horotec or Bergeon. The blades will require sharpening and dressing to achieve a good tip that fits whatever screw head you’re working with. At this time I feel like they are worth it. Yes, I would buy these again at my current skill level.

    Where to buy

    These are available on AliExpress. If you want to help me out a little use my link. Thank you.

    https://s.click.aliexpress.com/e/_c2JqMFYV